User guide

RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Configuring NTP 99
Figure 57: NTP Server Table
2. Select either Primary or Backup. The NTP Server form appears.
54
2
3
1
Figure 58: NTP Server Form
1. Server Box 2. IP Address Box 3. Update Period Box 4. Apply Button 5. Reload Button
3. Configure the following parameter(s) as required:
Parameter Description
Server Synopsis: Any 8 characters
Default: Primary
This field tells whether this configuration is for a Primary or a Backup Server.
IP Address Synopsis: ###.###.###.### where ### ranges from 0 to 255
The Server IP Address.
Update Period Synopsis: 1 to 1440 min
Default: 60 min
Determines how frequently the (S)NTP server is polled for a time update.If the server
cannot be reached in three attempts that are made at one minute intervals an alarm is
generated.
4. Click Apply.