Installation guide

Installation
4.3.1 AC Power Supply Wiring Examples
Figure 16: AC Single Power Supply Wiring
Example
Figure 17: AC Dual Redundant Power Supply
Wiring Example
Notes:
1. 100-240VAC rated equipment: A 250VAC appropriately rated circuit breaker must be
installed.
2. Equipment must be installed according to the applicable country wiring codes.
3. When equipped with two HI voltage power supplies, independent AC sources can be
used to power the product for greater redundancy.
18
RuggedCom
®
RuggedSwitch
®
RSG2200 Installation Guide rev115