User guide

Chapter 3
Device Management
RUGGEDCOM ROS
User Guide
56 Managing Ethernet Ports
Figure 18: Remote Syslog Server Table
2. Select the server from the table. The Remote Syslog Server form appears.
75
6
4
3
2
1
Figure 19: Remote Syslog Server Form
1. IP Address Box 2. UDP Port Box 3. Facility Box 4. Severity Box 5. Apply Button 6. Delete Button 7. Reload Button
3. Click Delete.
Section 3.6
Managing Ethernet Ports
The following sections describe how to set up and manage Ethernet ports:
NOTE
For information about configuring remote monitoring for Ethernet ports, refer to Section 3.10,
“Managing Remote Monitoring”.
• Section 3.6.1, “Controller Protection Through Link Fault Indication (LFI)”
• Section 3.6.2, “Viewing the Status of Ethernet Ports”
• Section 3.6.3, “Viewing Statistics for All Ethernet Ports”
• Section 3.6.4, “Viewing Statistics for Specific Ethernet Ports”
• Section 3.6.5, “Clearing Statistics for Specific Ethernet Ports”