User guide

RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Configuring Port Security 203
Parameter Description
Authorized MAC address learned by the switch.
VID Synopsis: 0 to 65535
VLAN Identifier of the VLAN upon which the MAC address operates.
If a MAC address is not listed, do the following:
• Configure port security. For more information, refer to Section 5.10.3, “Configuring Port Security”.
• Configure IEEE 802.1X. For more information, refer to Section 5.10.4, “Configuring IEEE 802.1X”.
Section 5.10.3
Configuring Port Security
To configure port security, do the following:
1. Navigate to Port Security » Configure Ports Security. The Ports Security table appears.
Figure 159: Ports Security Table
2. Select an Ethernet port. The Ports Security form appears.
7
6
5
4
3
2
1
Figure 160: Ports Security Form
1. Port Box 2. Security List 3. Autolearn Box 4. Shutdown Time Box 5. Status Box 6. Apply Button 7. Reload Button
3. Configure the following parameter(s) as required: