User guide

RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Deleting a Static MAC Address 163
Parameter Description
Enter the port number upon which the device with this address is located. The security
mode of the port being selected should not be '802.1X'.
If the port should be auto-learned, set this parameter to 'Learn'. The option 'Learn' is
applicable for Port Security in 'Static MAC' mode.
CoS Synopsis: { Normal, Crit }
Default: Normal
Prioritizes traffic for the specified MAC address.
4. Click Apply.
Section 5.5.3.3
Deleting a Static MAC Address
To delete a static MAC address from the Static MAC Address Table, do the following:
1. Navigate to MAC Address Tables » Configure Static MAC Addresses. The Static MAC Addresses table
appears.
Figure 115: Static MAC Addresses Table
2. Select the MAC address from the table. The Static MAC Addresses form appears.
7
5
6
4
3
2
1
Figure 116: Static MAC Addresses Form
1. MAC Address Box 2. VID Box 3. Port Box 4. CoS Options 5. Apply Button 6. Delete Button 7. Reload Button
3. Click Delete.