User guide

Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
162 Adding a Static MAC Address
1
Figure 113: Static MAC Addresses Table
1. InsertRecord
2. Click InsertRecord. The Static MAC Addresses form appears.
7
5
6
4
3
2
1
Figure 114: Static MAC Addresses Form
1. MAC Address Box 2. VID Box 3. Port Box 4. CoS Options 5. Apply Button 6. Delete Button 7. Reload Button
3. Configure the following parameter(s) as required:
Parameter Description
MAC Address Synopsis: ##-##-##-##-##-## where ## ranges 0 to FF
A MAC address learned by the switch.
Maximum of 6 wildcard characters may be used to specify a range of MAC addresses
allowed to be learned by the Port Security module (when Port Security is set to 'Static
MAC' mode). Wildcard must start from the right hand end and continuous.
Examples:
• 00-0A-DC-**-**-** means the entire MAC address space of RuggedCom.
• 00-0A-DC-12-3*-** means the range 00-0A-DC-12-30-00 to 00-0A-DC-12-3F-FF.
VID Synopsis: 1 to 1000
Default: 1
VLAN Identifier of the VLAN upon which the MAC address operates.
Port Synopsis: 1 to maximum port number or { Learn }
Default: Learn