User guide

RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Managing MAC Addresses 159
Parameter Description
DSCP Synopsis: 0 to 63
Default: 0
Differentiated Services Code Point (DSCP) - a value of the 6 bit DiffServ field in the
Type-Of-Service (TOS) field of the IP header.
CoS Synopsis: { Normal, Crit }
Default: Normal
Class of Service assigned to received frames with the specified DSCP.
4. Click Apply.
5. Configure the CoS parameters on select switched Ethernet ports as needed. For more information, refer to
Section 5.4.2, “Configuring Classes of Service for Specific Ethernet Ports”.
Section 5.5
Managing MAC Addresses
The following sections describe how to configure and manage MAC addresses:
• Section 5.5.1, “Viewing a List of MAC Addresses”
• Section 5.5.2, “Configuring MAC Address Learning Options”
• Section 5.5.3, “Managing Static MAC Addresses”
• Section 5.5.4, “Purging All Dynamic MAC Addresses”
Section 5.5.1
Viewing a List of MAC Addresses
To view a list of all static and dynamically learned MAC addresses, navigate to MAC Address Tables » View
MAC Addresses. The MAC Addresses table appears.
Figure 110: MAC Address Table
If a MAC address is not listed, do the following:
• Configure the MAC address learning options to control the aging time of dynamically learned MAC addresses
of other devices on the network. For more information, refer to Section 5.5.2, “Configuring MAC Address
Learning Options”.