User guide

Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
128 Configuring VLANs for Specific Ethernet Ports
3
2
1
Figure 82: Global VLAN Parameters Form
1. VLAN-Aware Mode Options 2. Apply Button 3. Reload Button
2. Configure the following parameter(s) as required:
Parameter Description
VLAN-aware Synopsis: { No, Yes }
Default: Yes
Set either VLAN-aware or VLAN-unaware mode of operation.
3. Click Apply.
Section 5.2.4
Configuring VLANs for Specific Ethernet Ports
When a VLAN ID is assigned to an Ethernet port, the VLAN appears in the VLAN Summary table where it can be
further configured.
To configure a VLAN for a specific Ethernet port, do the following:
1. Navigate to Virtual LANs » Configure Port VLAN Parameters. The Port VLAN Parameters table appears.
Figure 83: Port VLAN Parameters Table
2. Select a port. The Port VLAN Parameters form appears.