Specifications

RUGGEDCOM RS8000
Installation Guide
Chapter 1
Introduction
Ports, Controls and Indicator LEDs 3
4
1
3
2
3
1
Figure 1: Front and Rear Panels
1. Power Indicator LED 2. Reset Button 3. Port Status Indicator LEDS 4. RS232 Serial Console Port (DB9)
Power Indicator LED This LED indicates the status of the power supply.
• Green = The power supply is supplying power
• Off = Power is off
Reset Button The reset button shuts down and restarts the device.
Port Status Indicator LEDs These LEDs indicate when serial ports are active.
LED State Meaning
Solid Link detectedLink
Off No link detected
Blinking Link activity (receiving)RX
Off No link activity
Blinking Link activity (transmitting)TX
Off No link activity
RS232 Serial Console Port This port is for interfacing directly with the device and accessing initial management
functions.