Installation guide

1.1 RMC30 Front Panel Description
The RMC30 LED definitions are as follows:
LED Activity Description
Power Solid (Green) Power On
Alarm Solid (Red) Alarm condition present. For example, Ethernet link failed, self-
test error, etc. See RMC30 User's Guide for complete details.
Link Solid (Yellow) Ethernet link established.
Act Blinking (Yellow) Transmitting/receiving Ethernet data.
Tx Blinking (Yellow) Transmitting serial data*
Rx Blinking (Yellow) Receiving serial data*
* The Tx/Rx LEDs blink for either RS232 and RS422/485 data.
RuggedCom
®
6 RuggedMC™ RMC30 Installation Guide Rev 105
Drawing 1 - RMC30 Front Panel Description
Reset Push Button
Transmit(Tx) and
Receive(Rx) LEDs
10Base Tx
Ethernet Port
Power Supply
Connector
Power & Alarm
LED Indicators
RS232/422/485
Connector