Manualshelf

Technical data

ManualsBrandsSiemens ManualsCell PhoneRS-485
11121314151617181920
Description
3.6 Bus and master
PAC RS485
Manual, 02/2008, A5E02091800B-01
17
3.6 Bus and master
Restrictions
The following restrictions apply for the use of a bus and a master:
● You must use only broadcast commands that agree in syntax and meaning with the
broadcast commands supported by the Power Monitoring Device.
● The following must be set on the bus and the master and on all nodes on the bus:
– The same baud rate
– The same communication settings, e.g. data bits, stop bits, parity bit
– The same protocol