Technical data

Installation instructions and notes on usage
D.3 Assembly instructions for SIMATIC NET PROFIBUS plastic fiber-optics with simplex connectors
PROFIBUS Network Manual
System Manual, Edition 04/2009, C79000-G8976-C124-03
295
7. Cut off the remains of the jacket, Kevlar yarn and foil
with scissors.
8. Standard cable with outer jacket removed.
Table D- 3 Splitting the SIMATIC NET PLASTIC FIBER OPTIC duplex core
1. Insert a sharp knife in the depression between the two
cores 20 cm (if using a connector adapter 30 cm) from
the end and split the duplex core to the end of the cable.
Notice: The jacket of the individual cores must not be
damaged.
2. Notice:
Do not split the cores with your hand otherwise you can
soon bend the cores beyond their minimum bending
radius.
3. Separated duplex core