Technical data

Installation instructions and notes on usage
D.2 Fitting connectors to SIMATIC NET PCF fiber-optic cables with the BFOC 6GK1 900-0HL00-0AA0 termination kit
PROFIBUS Network Manual
System Manual, Edition 04/2009, C79000-G8976-C124-03
287
Fitting connectors
1. Remove the outer jacket using a stripping tool.
2. Set the cutting depth of the stripping tool so that the
inner cores cannot be damaged.
3. Pull off the outer jacket.
4. Cut off the Kevlar yarn and fleece wrapping with the
Kevlar scissors.
5. Cut off the blind elements (gray) and the support
element (white) with the side cutter.
6. Position the ø 1 mm opening of the stripping
pliers approximately 80 mm from the end of the core.
7. Cut into the core jacket and pull the jacket partly
off without skewing.