Technical data
Installation instructions and notes on usage
D.1 Fitting connectors to SIMATIC NET PCF fiber-optic cables with the simplex 6GK1 900-0KL00-0AA0
termination kit
PROFIBUS Network Manual
280 System Manual, Edition 04/2009, C79000-G8976-C124-03
Fitting connectors
1. Remove the outer jacket using a stripping tool.
2. Set the cutting depth of the stripping tool so that the
inner cores cannot be damaged.
3. Pull off the outer jacket.
4. Cut off the Kevlar yarn and fleece
wrapping with the Kevlar scissors.
5. Cut off the blind elements (gray) and the support
element (white) with the side cutter.
6. Position the ΓΈ 1 mm opening of the stripping
pliers approximately 80 mm from the end of the core.
7. Cut into the core jacket and pull the jacket partly
off without skewing.