Technical data

Bus connectors and preassembled cables
6.9 Preassembled connecting cables
PROFIBUS Network Manual
System Manual, Edition 04/2009, C79000-G8976-C124-03
187
Table 6- 16 Ordering data for the SIMATIC NET 8302 connecting cable
Ordering data:
SIMATIC NET 8302 connecting cable
for PROFIBUS for connecting end devices to
OLMs and OBTs, preassembled with 2 D-sub
male connectors, 9-pin, terminators can be
activated.
3 m
5 m
10 m
6XV1 830-2AH30
6XV1 830-2AH50
6XV1 830-2AN10
6.9.3 M12 connecting cable
Area of application
The M12 connecting cable is a preassembled connecting cable (PROFIBUS FC trailing
cable) for connecting PROFIBUS nodes (for example SIMATIC ET 200) with degree of
protection IP65; for transmission speeds up to 12 Mbps.
Design
The M12 connecting cable consists of the PROFIBUS trailing cable. At one end, it has a 5-
pin M12 male connector with a straight cable outlet and at the other end, it has a 5-pin M12
socket with a straight cable outlet, in each case B coded. The cable is available in lengths of
0.3 m to 15 m.
Figure 6-32 M12 connecting cable