Technical data

Bus connectors and preassembled cables
6.7 Bus terminals for RS485 networks
PROFIBUS Network Manual
182 System Manual, Edition 04/2009, C79000-G8976-C124-03
Total power loss 0.45 W
Weighting value 0.1
In operation at 1.5 Mbps along with RS485 bus
terminal. (see Section: "Network configuration")
Electromagnetic compatibility
Emission
Limit class B complying with EN 55022=CISPR 22
Noise immunity on signal lines ± 2kV (to IEC 801-5 / IEC 1000-4-5, surge)
± 2kV (to IEC 801-4 / IEC 1000-4-4, burst)
Immunity to discharges of static electricity ± 6kV, contact discharge (to
IEC 801-2; ESD / IEC 1000-4-2)
Immunity to RF interference 10 V/m at 80 % amplitude modulation with 1 kHz,
80 MHz - 1 GHz (to IEC 801-3 / ENV 50140)
10 V/m 50 % load factor at 900 MHz (to
ENV 50204)
10 V with 80 % amplitude modulation at 1 kHz
10 kHz - 80 MHz (to IEC 801-6 / ENV 50141)
Climatic conditions:
Operating temperature 0 to 60 °C
Storage/transport temperature -40 to 70 °C
Relative humidity max. 95% at +25 °C no condensation
Mechanical conditions:
Vibration
Operation
tested to DIN IEC 68-2-6
10 to 58 Hz; amplitude 0.075 mm
58 to 500 Hz; acceleration 9.8 m/s
2
Shock
Operation
tested to DIN IEC 68-2-27
Half-sine: 100 m/s
2
, 16 ms
Construction
Dimensions (W x H x D) in mm 50 x 135 x 47
Spur line length 1.5 m
Weight
(incl. 1.5 m spur line)
Approx. 350 g
Type of protection IP20
Error Detection Character CE, UL, CSA