Technical data
Bus connectors and preassembled cables
6.7 Bus terminals for RS485 networks
PROFIBUS Network Manual
178 System Manual, Edition 04/2009, C79000-G8976-C124-03
● Remove a length of approximately 12 mm of the braid shield and foil shield (the foil shield
can be left somewhat longer).
6,(0(16
6,(0(16
6FUHHQILOP
)ROGEUDLGVKLHOGEDFNRYHU
RXWHUMDFNHW
Figure 6-27 Preparing the bus cable for connection to the bus terminal
● Fold back the braid shield over the cable jacket.
● Strip approximately 10 mm from the end of the wires.
● Fit the bus cable to the terminal so that the braid shield is lying directly under the cable
clamp.