Technical data

Bus connectors and preassembled cables
6.3 FastConnect D-sub bus connector
PROFIBUS Network Manual
System Manual, Edition 04/2009, C79000-G8976-C124-03
151
Connecting up the bus cable
Connect the bus cable to the bus connector with order number 6GK1 500-0FC00 as follows:
Figure 6-9 Connecting up bus connector 6GK1500-0FC10
① Cable shield
② Strip bus cable (for example 6XV1 830-0EH10) for example with stripping tool
6GK1 905-6AA00
③ Cover for insulation piercing contacts
Insert the green and red wires as far as the limit stop in the open contact cover
Close the contact cover completely (push down as far as the limit stop)
④ Press the cable into the recess (the cable shield must lie on the contact element)
⑤ Close the housing cover and screw down