Basic Documentation

27/58
Siemens Bus operator unit RMZ792 Series B CE1P3113en
Building Technologies 6 "Commissioning" menu 07.07.2011
6.3.2 "Display list" submenu
• Change the display format of the device list.
• Show or hide the device address in the device list.
Main menu> Commissioning > Device list > Display list
Operating line Range Factory setting
Type of display Address and name /
Name only
Address and
name
The devices are displayed with address and name, or with just the name in the Device
list depending on the setting.
6.3.3 "Sort list" submenu
• Sort the device list by ascending device address.
• Sort the device list by ascending device name.
• Manually sort the list to place common devices at the top of the list.
Main menu > Commissioning > Device list > Sort list
Operating line Range Factory setting
Sort automatically by Device addresses /
Device names
---
Sort manually
You can sort the device list either manually or automatically. Start to sort via operating
line Sort automatically, by Device address or by Device name.
The following submenu allows you to manually sort the device list.
Main menu > Commissioning > Device list > Sort list > Sort manually
Operating line Range Factory setting
Device address name 1
1…150
…
Device address name n 1…150
After selecting the device, its position is displayed in the device list. Adjusting a value
allows for moving the device to the desired position.
You can freely determine the position of each device within the device list (1 = Top of
the list, 150 = Bottom of the list). The positions of the remaining devices are adjusted
automatically. There cannot be any gaps in the list. If the desired position is after the
bottom of the list, the device is placed in the very last position.
Application
Operating lines
Application
Operating lines
Operating lines