Basic Documentation

25/58
Siemens Bus operator unit RMZ792 Series B CE1P3113en
Building Technologies 6 "Commissioning" menu 07.07.2011
Information Description
Symbol for bus device
B.L.A
KNX device address (optional):
B : Area [0…15]
L : Line [0…15]
A : Address [1…255]
See also Section 6.3.2, "Display list" submenu.
Name
Device name:
Heating : Text, max.20 characters
("Heating" is a mere example!)
… : Device without names
!… : Name of the device cannot be read
See also Section 6.3.7, "Name devices" submenu.
Status
Device status:
: Device ok, no faults
: Device fault
: Status read from device
: Status cannot be read, possible failure
or in commissioning mode
See also Section 10.1.1, Device list in the "Main menu".
Various functions allow for creating a customized device list reflecting operator needs
and requirements:
• Automatic device search within line/area.
• Retroactive addition of additional devices:
− Individual device.
− All devices within a line.
− All devices within an area.
• Delete individual devices from the device list.
• Assign or change device names in the device list.
• Determine the device presentation within the device list.
• Change the order of devices within the device list.
• Delete the entire device list.
The following status messages may be displayed upon device list operations and
dependent on the menu:
Status messages Description
--- Command not yet executed.
Command being executed.
Searched for Device list created successfully.
Added Devices added to list successfully.
Address invalid Searched for device does not exist or does not respond.
Sorted Device list sorted successfully.
Deleted Device list deleted successfully.
Rejected Device search not possible due to current area and line
settings.
Functions