Basic Documentation

186/256
Siemens Modular Heating Controller RMH760B CE1P3133en
Building Technologies 11 Logic functions 2017-09-29
RMH760 > Commissioning > Extra configuration > Miscellaneous > Input identifier
- Main input identifier by default "°C"
- Input identifier from function block Faults by default "Digital"
- Input identifier from function block Miscellaneous by default "°C"
11.1.2 Assign texts
You can assign a specific text to each Logic and operation selector. The text is
displayed on the menu and in the operating line.
Main menu > Commissioning > Settings > .... or
Main menu > Settings > Logic functions > Logic 1...4
Operating line
Range
Factory setting
Logic 1...4 Max. 20 characters Logic 1...4
Operation selector 1...4
Max. 20 characters
Operation selector 1...4
11.1.3 Setting values switching value On and Off
The Logic can process digital and analog signals. Setting values "[Logic x switching
value n] on" and "[Logic x switching value n] off" are used to convert a continuous
signal to a 2-position signal (On/Off).
Main menu > Commissioning > Settings > .... or
Main menu > Settings > Logic functions > Logic 1...4
Operating line Range Factory setting
[Logic A switching value 1] on
Depending on selected type
Type-dependent
[Logic A switching value 1] off
Depending on selected type
Type-dependent
[Logic A switching value 2] on
Depending on selected type
Type-dependent
[Logic A switching value 2] off
Depending on selected type
Type-dependent
[Logic A switching value 3] on
Depending on selected type
Type-dependent
[Logic A switching value 3] off
Depending on selected type
Type-dependent
[Logic B switching value 1] on
Depending on selected type
Type-dependent
[Logic B switching value 1] off
Depending on selected type
Type-dependent
Setting values
Setting values