Basic Documentation

184/256
Siemens Modular Heating Controller RMH760B CE1P3133en
Building Technologies 11 Logic functions 2017-09-29
You can select format "Hours:Minutes" as an extended time format (> 59.59 m.s) for
the Logic function.
The changeover impacts all time-related parameters of the Logic function block (switch-
on/off delay and min. switch-on/off time).
Time format "h:m" offers a 10-minute increment setting range.
The unit of the input terminal is automatically assigned:
•
If a terminal is already used by another function (e.g. heating circuit \ flow
temperature, Comparator …), this will be inherited to the Logic input
•
If the terminal is not used, it is defined as “°C“
•
If an unused terminal should use an universal unit (e.g. ppm, Digital, %, W/m
2
…), it
must be configured to the function block „Miscellaneous“
For example, in a Logic block (Logic 1…4) is “ppm“ used as measurement. Therefore, it
must be ensured that the unit “ppm“ is defined in the menu
(example below N.X3 = ppm).
Main menu > Commissioning > Extra configuration > Miscellaneous > Inputs
Operating line
Adjustable values
Factory setting
Display input 1:
N.X3
---
Display input 2:
---, N.X1 … A9(2).X6
---
Display input 3:
---, N.X1 … A9(2).X6
---
Display input 4:
---, N.X1 … A9(2).X6
---
Display input 5:
---, N.X1 … A9(2).X6
---
Display input 6:
---, N.X1 … A9(2).X6
---
Display input 7:
---, N.X1 … A9(2).X6
---
Display input 8:
---, N.X1 … A9(2).X6
---
Main menu > Commissioning > Extra configuration > Miscellaneous > Input identifier
Operating line
Adjustable values
Factory setting
Display input 1:
ppm
°C
Display input 2:
°C, % … Digital
°C
Display input 3:
°C, % … Digital
°C
Display input 4:
°C, % … Digital
°C
Display input 5:
°C, % … Digital
°C
Display input 6:
°C, % … Digital
°C
Display input 7:
°C, % … Digital
°C
Display input 8:
°C, % … Digital
°C
Notes
Important
Additional important
information