Environmental Declaration

Building Technologies
01.04.2010 CE1E3110en01
Page 2 of 2
Materials
Total weight of device
417...494 g
Plastics PC Base, housing,
cover, terminal strips
263 g
ASA Sliders
1 g
Silicone caoutchouc Alarm button
1 g
Metals Chromium nickel steel
material no. 1.4310
Cage spring
6...13 g
Copper alloy: P 0.1 %; Ni 1.8 %;
Si 0.35 %; rest copper (97.75 %)
Contact springs
14...32 g
PCB assembled FR4, 8 % bromium TBBA
137...197 g
Special Components
Electrolytic capacitor 5.32 cm³ On PCB (7 g)
Electrolytic capacitor 1.14 cm³ On PCB (3 g)
Electrolytic capacitor 0.79 cm³ On PCB (1 g)
Supercap 0.33 cm³ On PCB (1 g)
Relays, contacts AgSnO2, AgNi 0.15 2...7 pieces on PCB (16…56 g)
Weights in brackets are already included in components declared under materials
Disposal
The device is classified as waste electronic equipment in terms of the European
Directive 2002/96/EC (WEEE) and should not be disposed of as unsorted
municipal waste.
The relevant national legal rules are to be adhered to.
Regarding disposal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Comments
Materials
The devices (exceptions see page 1) are free from substances banned by the Directive 2002/95/EC (RoHS):
- Pb, Hg, Cr6+, PBB, PBDE: < 0.1 % by weight in homogeneous materials
- Cd: < 0.01 % by weight in homogeneous materials
The devices are halogen-free except the PCBs (TBBA)
The silicone caoutchouc buttons and panels used in the devices have undergone heat treatment at 200 °C
for 2 hours. The plastic parts were produced without the use of silicone-containing releasing agents.
Environmental benefits
- High-quality PID controller operating with predefined and tested parameters
- Energy-saving setpoints and operating mode (Precomfort)
- Demand-dependent plant operation (plant is switched on only when required)
- Heating limit switch (heating is switched off in the summer)
- Second fan speed is switched on only when required by the room
- Load-dependent switching of pumps
- Indoor air quality control (demand-dependent switching of fan)
This declaration is for information purposes only
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Switzerland Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this
information to the maximum extent under the law.
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.