Install Instructions

Document No. 129-905
Installation Instructions
March 26, 2015
Page 6 of 18
Siemens Industry, Inc.
Set-up Wizard
When the unit is powered up for the first time,
WIZARD displays. This tool is used to program the
basic system parameters. Additional parameters can
be accessed directly via the Installer/Expert Set-up
menus.
NOTE: The thermostat will not start the control
sequence until the Set-up Wizard is
complete.
1. Press WIZARD to access the menu.
2. Press + or – to change parameter settings, and
then use left and right arrows to select the
additional parameters.
3. After verifying all parameters, press Confirm to
save and complete.
4. INSTALLER displays. If setup is complete,
press the Settings icon [
] to exit the Set-up
Wizard. If further setup is needed, continue to
Step 6.
5. Press INSTALLER to access the Installer Menu
and more detailed setup. See Table 3 through
Table 7 for all parameter descriptions.
6. Use the space provided in Table 15 to record
modified parameter settings.
7. Press the Settings icon [
] when finished to
exit setup.
Programming Temperature Setpoints
1. Touch the center of the Home screen to access
the room temperature screen. Use the left []
and right [] arrows adjacent to the text line to
display the room temperature and humidity.
2. Touch the Setpoint icon [
] of the screen to
access room temperature and humidity
setpoints.
NOTE: Only the setpoints in the current mode
display and can be modified. For
instance, if the thermostat is in heating
mode, only the heating setpoint
displays and can be modified. If the
thermostat is in AUTO mode, both the
heating and cooling setpoints will be
displayed and can be modified.
3. Use the left [] and right [] arrows to access
the different setpoints, and the + and – icons to
adjust the setpoints.
4. Touch the center of the screen to exit Setpoint
Programming.
NOTE: If the screen is not touched for 10
seconds, the unit returns to the Home
screen.
Programming Time and Date
1. Touch the center of the Home screen.
2. Press the Settings icon [
]. SCHEDULER
displays.
3. Use the left [] and right [] arrows to access
the Time menu. Press TIME. Press the two-digit
hour display to change the hour, or press the
two-digit minute display to change the minutes.
Press the left arrow to decrease the value, and
the right arrow to increase the value.
4. Press the Settings icon [
] to save.
5. Use the left [] and right [] arrows to access
the Date menu. Press DATE. Use the arrows to
select the month and year; use +/- to set the
date.
6. Press the Settings icon [
] to save.
Installer Menu
1. Touch the center of the Home screen.
2. Press the Settings icon [
]. SCHEDULER
displays.
3. Press the left arrow [].
4. Press INSTALLER.
5. Using the lower left [] and right [] arrows,
enter the password.
6. Press PASSWORD to accept the password.
NOTE: The Installer Level default password is
00:00
7. Press the Settings icon [
] to accept
changes and return the unit to the Home
screen.
NOTE: If you do not provide input, the thermostat
will automatically exit the Installer menu and
resume normal system control after five
minutes.