User Manual

Copyright © Siemens Switzerland Ltd 2016 All rights reserved.
Page 42
Configure Input Points
Sets Point Type for Input Points. Point
1 shown and repeat for Inputs 2 – 4.
Ensure no duplication between
assignments for Inputs 1 – 4.
1 = Indoor Temp (Remote)
2 = Indoor Temp (Average)
3 = Supply Temp
4 = Return Temp
5 = Outdoor Temp
6 = Humidity (0-10V)
7 = CO2 (0 – 10V)
8 = Occupancy (DI)
9 = Fault (DI, triggers Service Indicator)
OFF = Not used