Operating Instructions

2 / 24 A6V11228376_en--_c

3. Two ways to set up a network connection:

 Select Network – Follow the on-screen step-by-step instructions

to connect to a WLAN

network.

 Push Button Setup – Connect to a WPS compatible router.

Note:

a. You can skip this step if the network connection fails or you want

to connect to the network another time.

b.The supported WLAN channel range is from 1 to 11. Check your

router settings if your thermostat cannot find the router.

Using the WPS router feature:

a. Press the WPS button on your router when prompted by your

thermostat.

b. Tap Connect on your thermostat to connect to the network.

c. After a connection is established, continue with other settings as

desired.

4. Select the equipment type.

 Tap to manually configure the thermostat.

 Select the type of HVAC system corresponding to your

equipment.

 Tap .

5. Continue to set up the heating or AC system details.

Configure sub-options. Note that the configuration screens may

differ depending on the type of the system.

Your thermostat operates in a frequency band range from 2.4 GHz to 2.4835 GHz, and the maximum radio-frequency

power transmitted in the frequency band is 18 dBm.