Commissioning Instructions

Installation
2
6 | 61
A6V11214854_enUS_c
2 Installation
● The thermostat is designed for wall mounting.
● The recommended height is 5 feet above the floor.
● Do not mount the thermostat in recesses, shelves, behind curtains or doors, or
above or near heat sources.
● Avoid direct exposure to sun and drafts.
● Seal the conduit and/or wall opening, as drafts can affect sensor readings.
● Observe maximum ambient conditions.
1. Switch off power to the heating/cooling system at the breaker or system power
switch.
2. Remove the old thermostat from the wall with wires still connected.
3. Using the provided wire decals , label the existing wire connections. It is also
helpful to take a picture of the current wire connections for subsequent
reference.
4. Disconnect all the labeled wires and then remove the old thermostat.
NOTICE! Do not discard the old thermostat in the trash if it contains
Mounting
Installing the thermostat