User Manual

9. Tap Start to restart.
The thermostat restarts immediately. After restart, the home screen
is displayed.
10. Set up the mobile application.
· Using smartphones running iOS 10.0 (or above) or Android 5.0
(or above):
a. Make sure the smartphone is connected to the Internet.
b. Download and install the free mobile application Siemens
Smart Thermostat RDS from App Store® or Google Play™.
c. Follow the mobile application startup steps to register your
account.
Note: If the thermostat is connected to the Internet and
displayed on the home screen, you can download and install the
mobile application as follows:
a. Tap.
b. Scan the QR code displayed as shown on the left using your
smartphone.
c. Open the corresponding website, expand the section on
mobile app, and go to App Store® or Google Play™.
11. Activate your thermostat. This links the thermostat to your
registered account.
· Make sure the thermostat and smartphone are connected to the
Internet.
· Using the application’s built-in QR code scanner, scan the QR
code on the activation code sticker shipped with the thermostat.
You can also enter the code manually.
Note: Only one activation code can be connected to one account.
However, one user account can be associated with a maximum of
12 thermostats. If you want to scan the code directly from the
thermostat, tap on the home screen, then tap to go to the
activation code page.