User Manual

ManualsBrandsSiemens ManualsThermostats (temperature controller with sensor)RDS120 Smart Thermostat Commissioning

Siemens Switzerland Ltd. declares that the radio equipment type RDS120 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at www.siemens.com/download?A6V10733818.

Quick guide

Smart Thermostat RDS120 en

Welcome! This Quick guide walks you through:

o Steps to connect the thermostat to the Internet.

o Steps to configure the thermostat to work with your heating or AC (air

conditioning) system.

o Steps to register the thermostat and set it up to work with your mobile

devices.

o Basic operations on the local thermostat and mobile application.

Visit www.siemens.com/smart-thermostat

or more infor

mation about

your thermostat

Before configuration, make sure the thermostat is installed and powered up along with:

A WLAN compatible router Valid email address Smartphone

1. Select a language.

· Tap the language to select.

· Tap to view more languages.

· Tap .

Summary of content (7 pages)

PAGE 1
Quick guide Smart Thermostat RDS120 en Welcome! This Quick guide walks you through: o Steps to connect the thermostat to the Internet. o Steps to configure the thermostat to work with your heating or AC (air conditioning) system. o Steps to register the thermostat and set it up to work with your mobile devices. o Basic operations on the local thermostat and mobile application. Visit www.siemens.com/smart-thermostat for more information about your thermostat.
PAGE 2
. Set an administrator password to prevent access to advanced settings. We recommend a strong password, particularly if the thermostat is installed in a public location. If you decide to skip this step, you can also set the password later under > Advanced settings > Password. 3. Two ways to set up a network connection: · Select Network – Follow the on-screen step-by-step instructions to connect to a WLAN1 network. · Push Button Setup – Connect to a WPS compatible router. Note: a.
PAGE 3
5. Continue to set up the heating or AC system details. · Configure sub-options. Note that the configuration screens may differ depending on the type of the system. 6. Select the network connection type. End or home users · Selecting Private WLAN means that the thermostat is connected to your own WLAN network. You need to choose and manage your password. Institutional users · Selecting Administrated WLAN means that the thermostat is connected to the facility WLAN network.
PAGE 4
9. Tap Start to restart. The thermostat restarts immediately. After restart, the home screen is displayed. 10. Set up the mobile application. · Using smartphones running iOS 10.0 (or above) or Android 5.0 (or above): a. Make sure the smartphone is connected to the Internet. b. Download and install the free mobile application Siemens Smart Thermostat RDS from App Store® or Google Play™. c. Follow the mobile application startup steps to register your account.
PAGE 5
Congratulations! You have successfully registered and configured your thermostat and linked with your registered account. You can now enjoy the convenience and control of your comfort while saving energy. Basic operations (see the online user guide for more information) Local device idle screen 1 Relative room humidity 2 3 Room air quality status: good, average, poor. Green leaf: Energy-optimized mode. Red leaf: Tap to restore the energy-optimized mode.
PAGE 6
App home screen Schedule page 1 Options, room name, setpoint and schedule settings. 2 Room humidity, outside air temperature (if available) and room air quality status. 3 Green/red leaf indication 4 Tap to switch between AUTO and Manual (see previous page). 5 Room temperature 6 Decrease setpoint, current setpoint and increase setpoint. Current mode (Comfort, Economyand Unoccupied). Time for the next mode Tap to toggle between At home and AWAY.
PAGE 7
Running hours screen 1 Seven-day view by default, showing the heating or cooling running hours or both of each week day counting down from the current day. 2 Tap to switch to the four-week view. 3 Tap to switch to the 12-month view. 4 Indication of heating or cooling running hours or both 5 The current day/month 6 The current month/year Note: The Running hours widget displays on the mobile application if the heating or cooling or both has been enabled.