User Manual

Getting started with the thermostat
Home screen icon overview
2
A6V10733807_enUS_a 9 | 38
Icon Description
Displays when the system works in an energy-optimized mode. If the
leaf is red, it means that some pre-defined settings have been changed.
Tap the red leaf to restore to the energy-saving mode. The leaf turns
green.
Temperature setpoint slider. Icon color changes as setpoint is changed:
● Slider changes to orange when setpoint is moved to a point that is
higher than the current room temperature and the system enters
heating mode to warm up the room.
● Slider changes to blue when setpoint is moved to a point that is
lower than the current room temperature and the system enters
cooling mode to cool down the room.
● If the system has reached setpoint and is idle, the slider color stays
white.
NOTE: The condition of switching between heating and cooling modes
is that the thermostat has been configured accordingly and then the
thermostat responds based on the background logical processing of the
comparison between the current room temperature and the heating and
cooling setpoint for the current mode.
Relative room humidity
The thermostat operates under a schedule. If a schedule has not been
set, the thermostat operates with the default schedule. This default
schedule may be the system default or may be specific under Advanced
Settings > Optimization.
When this icon is toggled on, the temporary change of the temperature
setpoint and fan settings only takes effect during the current scheduled
mode and will be overridden to the scheduled settings when the next
scheduled mode starts.
NOTE: If the thermostat has not been connected to a WLAN network, it
cannot read the real time from the network and thus cannot follow a
schedule. In this case, it always works under the Comfort mode.
User overridden. Temporary setpoint changes or fan settings are
effective if this icon is toggled on.
Tap to display options, such as Operation Mode, Settings and
Advanced Settings.
Indicates the room air quality is good.
Indicates the room air quality is average.
Indicates the room air quality is poor.
Indicates the outside air temperature. The temperature value is
displayed beside this icon. Note that this value is valid only if you’ve
connected an external outside air temperature sensor, configured it
correctly and the sensor itself can provide valid values.