User Manual
Operating the thermostat from the mobile app
Switching betwee
n Heating and Cooling
7
30 | 38 A6V10733807_enUS_a
Once the schedule for one day is set, it can be copied to other days. In addition,
preset setpoints for the different modes can be customized.
To initiate schedule operation
● From the Home screen of either the thermostat or the mobile app, tap if
is not displayed on the screen.
To set time periods for different operating modes
1. On the temperature control widget screen, tap and then tap Thermostat
schedule.
2. Select which day of the week to set schedules for. By default, the system uses
the current day.
3. On the vertical time line, tap and hold a specific time point to set a switching
point. A switching point marker displays beside the time point. To fine tune the
switching point, drag the switching point marker to the desired time.
4. Tap the switching point marker, and then select Comfort, Economy or
Unoccupied from the drop-down list.
5. Repeat Steps 3 and 4 to set other switching points.
NOTE: A maximum of five switching points per day can be set. To delete one, tap
on the switching point marker.
To copy schedule from one day to others
1. On the temperature control widget screen, tap .
2. Tap Thermostat schedule.
3. Specify the day schedule to copy from.
4. Tap Copy, and then select which days to copy to.
5. Tap Paste. The schedule is pasted.
To change the preset setpoints for different operating modes
1. On the temperature control widget screen, tap .
2. Tap any of the modes, for example, Unoccupied, to expand the preset
setpoints.
3. Drag the temperature slider to the setpoint.
7.10 Switching between Heating and Cooling
In the app, the default Auto mode can be changed to Heat or Cool ‘, or ‘Off
completely. For more information about the switchover between heating and
cooling, see Operating modes overview [➙ 14].
To change the default Auto mode
1. On any of the widget screen, tap , and then expand the drop down list beside
Thermostat mode.
2. Select either Heat, Cool ‘ or ‘Off.