User Manual

Operating the thermostat from the thermostat main unit
WLAN connection
4
16 | 38 A6V10733807_enUS_a
To connect to a network
1. If the thermostat is selected for commercial application (common wireless
infrastructure), do the following:
– From the Home screen, tap , and then tap . The Advanced Settings
page displays.
– If required, enter the administrator password.
– Tap , and then tap . Wait for the thermostat to discover the networks
nearby.
2. If the thermostat is selected for residential application (individual wireless
infrastructure), do the following:
– From the Home screen, tap , and then tap until the Settings page
displays.
– Tap , and then tap . Wait for the thermostat to discover the networks
nearby.
3. Tap the desired network. If necessary, tap or to scroll through the
networks to select one.
4. For secured networks, enter the selected password, then tap Connect.
Note: For more information about the administrator password, see Creating an
administrator password [➙ 18].
To add a network manually
1. If the thermostat is selected for commercial application:
– On the Advanced Settings page, tap , tap , and then tap to scroll
down to find and tap Add Network.
2. If the thermostat is selected for residential application:
– On the Settings page, tap , tap , and then tap to scroll down to find
and tap Add Network.
3. Enter the Network name (SSID) information.
4. To select a security type, tap the Security field.
5. Tap Connect.
6. If prompted, enter the relevant password, and then tap Connect.
To configure current network settings
1. If the thermostat is selected for commercial application:
– On the Advanced Settings page, tap and then tap . The current
network displays on the screen.
2. If the thermostat is selected for residential application:
– On the Settings page, tap and then tap . The current network displays
on the screen.
3. Tap Network Settings. The default DHCP (Dynamic host configuration protocol)
setting page displays on the screen.