Data Sheet for Product

4
Siemens
A6V10807602_en
--
_h
Smart Infrastructure
2021
-
07
-
16
Operation and settings
Normal display
1 Tap to display detailed information and additional setting possibilities.
2 Shows if the system is in an energy-optimized mode. If the leaf is red, predefined
settings were changed. Tap the red leaf to restore energy-saving mode. The leaf again
turns green.
3 Room temperature*)
4 Tap to toggle between “At home” and “Away”.
5 Shows if the thermostat works automatically ( ) or manually ( ). Using a
scheduler can mean the following:
● If there is Cloud connection and the scheduler has already been set, the thermo-
stat follows the scheduler. A temporary change of the temperature setpoint only
takes effect during the currently scheduled mode.
● If there is Cloud connection, but no scheduler has been set, the thermostat follows
the default scheduler set by the system.
● If there is no Cloud connection, the thermostat cannot retrieve scheduler infor-
mation.
6 Temperature setpoint slider. Icon color changes as setpoint is changed.
● If you increase the setpoint by dragging the slider to the right to warm up the room,
the slider color changes to orange.
● If no heating occurs, the slider color changes to white.
NOTICE
After initial setup of the thermostat, the displayed room temperature may not be correct be-
cause the temperature sensors need time for calibration. Wait for at least one hour for the
calibration.