Data Sheet for Product

3
Siemens
A6V10807602_en
--
_h
Smart
Infrastructure
2021
-
07
-
16
Monitoring of temperature and humidity
Monitoring of indoor air quality: “Good”, “Okay”, “Poor”
Secure access and data transmission with the Siemens Cloud Computing Platform
Use
The RDS110 is designed to control heating applications in apartments, single family homes,
dormitories, and other residential as well as commercial spaces.
RDS110 controls the following plant components:
Gas boiler
Radiator with valve
Radiator with pump
Electric floor heating
Fan with electric heating
Floor heating with valve
Floor heating with pump
Electric radiator
Electric boiler
Generic heating device
NOTICE
When selecting the gas boiler application, ensure a hydronic heating is used. The
RDS110.R is not calibrated for use in combination with a gas-fired ducted heating system.
In addition, an external relay is available to optionally control a domestic hot water (DHW)
boiler, humidifier or dehumidifier.
Two multifunctional inputs, optional and configurable for:
Operating mode switchover contact
The operating mode can change according to contact status.
Remote room temperature sensor
The remote temperature sensor can acquire the current room temperature. If the
sensor input signal is lost, the thermostat controls the room according to the internal
sensor.
Floor temperature sensor
The floor heating limitation function prevents the floor temperature from exceeding a
preset value.
Outside air temperature sensor
The outside air temperature sensor can acquire outside air temperature information
for display on touch screen.
Remote humidity sensor
The thermostat can control a standalone humidifier or dehumidifier. The relative
humidity is measured by the remote humidity sensor or internal humidity sensor.
Mechanical design
The room thermostat consists of the following parts:
Housing front with touch screen and sensors
Housing rear with terminals and relays
Metallic mounting plate for wall mounting
Accessories