User Manual

EPD - Type II
Based on ISO 14021
The silicone rubber mats have been heated at 200 ºC for 2 hours. The plastic parts were manufactured without silicone containing mold release agents.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)
Legal Disclaimer: This declaration is for information purpose only.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
The device is halogen-free.
A5W90003412 07.12.2017
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Beijing Siemens Cerberus Electronics Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the
maximum extent under the law.
Unrestricted Page 6/6