User Manual

ManualsBrandsSiemens ManualsThermostats (temperature controller with sensor)Smart Thermostat RDS110

EPD - Type II

Based on ISO 14021

S55772-T100 RDS110 Smart Thermostat

S55772-T101 RDS120 Smart Thermostat

Environmental

Product Declaration

Type of equipment /

Product No.

Product

Product line

Beijing Siemens Cerberus Electronics Ltd.

No.1 Fengzhi Dong Lu, Xi Bei Wang, Haidian District

100094, Beijing, China

Management System since by

ISO 9001 06.01.2001 LPCB

ISO 14001 05.07.2005 SGS

OHSAS 18001 12.12.2011 SGS

Typical energy consumption 79kWh/a

Maintenance

Fire protection according to

Fire load 4 … 5MJ

SRA

Not necessary

EN 60950

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes

the environmental impact of its products with respect to production, procurement, sales, use, services and disposal during

the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)

"Specifications on Environmentally Compatible Product and System Design".

Product use

Risk of fire

Unrestricted Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Product Type of equipment / Product No. S55772-T100 RDS110 Smart Thermostat S55772-T101 RDS120 Smart Thermostat Product line SRA Product Process control Beijing Siemens Cerberus Electronics Ltd. No.1 Fengzhi Dong Lu, Xi Bei Wang, Haidian District 100094, Beijing, China Management System since by ISO 9001 06.01.2001 LPCB ISO 14001 05.07.2005 SGS OHSAS 18001 12.12.
PAGE 2
EPD - Type II Based on ISO 14021 Packaging 21-PAP Fiber board Package box with printing 6-PS Package inner box with sponge Notes on disposal recyclable Total weight of device Materials 42g variant variant *) see below The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PAGE 3
EPD - Type II Based on ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; halogen-free; solder SnAgCu RDS110_Main PCB Assembly FR4; halogen-free; solder SnAgCu Smart Thermostat PIR PCB Assembly FR4; halogen-free; solder SnAgCu RDS110_Extend_230V PCB Assembly variant FR4; halogen-free; solder SnAgCu RDS120_Extend_24V PCB Assembly variant Special components (part of the assembled PCB) Total weight of device S55772-T101 [g] S55772-T100 *Variant parts list 253 261 Smart Thermostat HMI Fr
PAGE 4
EPD - Type II Based on ISO 14021 Smart THE WiFi antenna support frame 3 3 Smart THE Shield co.WiFi Top 1 1 1 1 Smart THE Mounting plate EU 35 35 Smart THE Mounting plate US Smart THE Shield co. WiFi Bottom 58 58 GB/T 13806.2 ST1.6X4 PT Screw 0 0 Screw ST2.
PAGE 5
EPD - Type II Based on ISO 14021 Fire load [MJ] 4 5 [kWh/a] 79 79 Typical energy consumption Special components (part of the assembled PCB) [pcs] Packaging Package box with printing [g] Package inner box with sponge 42 42 82 77 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too.
PAGE 6
EPD - Type II Based on ISO 14021 To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0.1 % w/w. (Status according to the creation date of this document.