User Manual

Getting started with your thermostat

Thermostat display ove

rview

15 |

Siemens

A6V10877569_en

Building Technologies

201

4.2 Thermostat display overview

1 Tap to display detailed information and additional settings.

Displays whether the system is in an energy-optimized mode. If the leaf is

red, predefined settings were changed. Tap the red leaf to restore the

energy-saving mode. The leaf again turns green.

3 Room temperature.

4 Tap to toggle between At home and AWAY.

Displays whether the thermostat is following a scheduler ( ) or following

your setpoint changes permanently ( ). Following a scheduler can mean

the following:

● If there is network connection and you’ve also set your scheduler, the

thermostat follows your scheduler. Your temporary change of the

temperature setpoint only takes effect during the currently scheduled

mode.

● If network is connected but no scheduler set, the thermostat applies the

system’s default scheduler. For more information on the default

scheduler, see Setting schedulers [➙ 47].

● Without network connection or valid time, the thermostat cannot retrieve

scheduler information from the Cloud. It always works under the Comfort

mode.

6 Tap or slide to change the room temperature setpoint.

Normal display