User Manual

Operating the thermostat on the device
Software updates
6
38 | 58
Siemens
A6V10877569_en
--
_
d
Building Technologies
201
9
-
01
-
08
Change extended configurations
1. On the Advanced Settings page, tap .
2. If prompted, enter the administrator password.
3. Tap > .
4. Tap OK to stop all the thermostat’s applications. The thermostat restarts.
5. After the restart is completed, tap I/O > Adapt.
6. Change the settings as desired.
You can reset the thermostat to its original factory settings. However, all user data
will be erased after the factory resetting.
Factory reset
1. On the Advanced Settings page, tap .
2. If prompted, enter the administrator password.
3. Tap > .
4. Tap OK to stop all of your thermostat’s applications. Your thermostat restarts.
5. After the restart is completed, tap Factory Reset.
6. Tap Reset. The thermostat is reset and restarted.
NOTE: After the thermostat is restarted, the setup wizard appears for easy
commissioning. Refer to the Quick guide for the detailed setup information.
6.7.4 Checking the basic information about your thermostat
You can check the following information about your thermostat:
● Model name
● Activation code and serial number of the thermostat
● Software and hardware version
● MAC and IP address
● Application used in the thermostat
Check the basic information about your thermostat
1. On the Home screen, tap , then tap and .
2. If prompted, enter the administrator password.
3. Tap > . Detailed information about your thermostat displays.
6.8 Software updates
The thermostat receives updates to get the latest functionality, enhancements and
bug fixes so that it has optimal performance. Normally, the updates occur
automatically through WLAN connection. It works in the background and doesn’t
affect your normal usage on the thermostat.
NOTE: During software updates, the system reboot(s) occurs automatically,
however, no previous settings are changed.
Resetting the thermostat