User Manual

4
Siemens Datasheet A6V10954420_en--_f
Smart Infrastructure 2020-10-29
Operating modes
The device has the following modes: Automatic, Comfort, Energy saving and Frost
protection.
Move the operating mode slider to the respective position to select another operating mode.
Automatic mode
Automatic mode is active when symbol
is displayed. The device
operates as the selected 24-hour time program.
Comfort mode
Comfort mode is active when symbol is displayed. The device
controls to the temperature setpoint adjusted at . This setpoint can
be adjusted by setting the program slider to .
Energy saving
mode
Energy saving mode is active when symbol is displayed. The device
controls to the temperature setpoint adjusted at . This setpoint can
be readjusted by setting the program slider to .
Frost protection
Frost protection is active when symbol is displayed. The device
controls to the preset temperature setpoint for frost protection.
Commissioning notes
Parameter list
Parameter Description Factory setting Setting range Remark
P01 Control behavior PID slow (4) 0 = 2P, 1.0 K
1 = 2P, 0.5 K
2 = PID fast
4 = PID slow
P02
Maximum
temperature
range
30 °C P03…30 °C
Limit of comfort
and economy
setpoint
P03
Minimum
temperature
range
5 °C 5 °C…P02
Limit of comfort
and economy
setpoint
End
Exit parameter
setting
Parameter setting
The parameter setting remains in non-volatile memory and is not erased when the battery is
removed. The reset function on the rear of the thermostat reloads the factory settings.