User Manual

EPD - Type II
Based on ISO 14021
Notes on disposal
Total weight of device 322g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
ABS FRONT CABINET (sliders) 41g
ABS FRONT CABINET (no sliders)
ABS REAR CABINET (one button)
ABS REAR CABINET (two buttons) 31g
ABS BATTERY COMPARTMENT 10g
PC LCD LENS 10g
PC LCD SUPPORT 7g
ABS ROTARY KNOB 9g
PC WALL PLATE 44g
PC TERMINAL BLOCK COVER 2g
ABS PUSH BUTTON 2g
POM SLIDE SWITCH BASE 2g
ABS SLIDE SWITCH CAP 2g
PC TABLE STAND SUPPORT
0.3MM TH'K SUS301-1/2H CONTACT PLATE+VE 1g
0.3MM TH'K SUS301-1/2H, DIA0.5MM SUS304-WPB
CONTACT PLATE -VE 1g
0.3MM TH'K SUS301-1/2H, DIA0.5MM SUS304-WPB
CONTACT PLATE COMMON 1g
DIA.0.8MM, C5191W-H; zinc plated ANTENNA
0.25MM TH'K C5191-H; nickel plated BATTERY CONTACT PLATE 1g
0.12MM TH'K SUS301-3/4H SLIDER CONTACT PLATE
0.8MM TH'K BRASS C2680-H; nickel plated CONTACT FORK 1g
BRASS WIRE CAGE BRASS WIRE CAGE 2g
POWER CONTACT PLATE; nickel plated
POWER CONTACT PLATE
2g
One-way, recyclable
Metals
Plastics
Materials
POWER CONTACT PLATE; nickel plated
POWER CONTACT PLATE
2g
Steel; nickel plated ST SCREW, 2.0X6.0, D=6 PWH/B 1g
Steel; nickel plated ST SCREW, 2.3X8.0 1g
Steel; nickel plated M/C SCREW, M3X10X0.5P, D=6"+/-"BH 1g
Steel; nickel plated NUT, SQUARE 1g
Steel; galvanized SCREW, 12TJ001N50 1g
LCD > 100 cm² 30g
Batteries / Accumulators 48g
Relays 15g
FR4; TBBA; solder SnAgCu RDHFLALL02V12 33g
FR4; TBBA; solder SnAgCu RDHFLALL01V11 29g
Others
PCBAs (Printed Circuit Board
assembled)
Page 2/5