Technical data

70 / 78
Siemens RDG400KN Basic documentation CE1P3192en
Building Technologies Supported KNX tools 20 Jul 2010
5.2.2 Operation and monitoring with ACS
In the ACS Operating program, select Plant, then Open to open the plant.
To start monitoring and operation, select Applications, then Popcard
ACS Operating supports parameter settings even during normal operation.
To change a control parameter, select Popcard, then Settings.
 Make sure you have logged on with sufficient access right
 Only control parameter can be changed, no application!
ACS Operating
Parameter settings in
ACS Operating
Notes: