Basic Documentation
Table Of Contents
- 1 About this document
- 2 Overview
- 3 Notes
- 4 Functions
- 4.1 Temperature control
- 4.2 Operating modes
- 4.3 Room temperature setpoints
- 4.4 Application overview
- 4.5 Power supply selection for RDG200KN
- 4.6 Additional functions
- 4.7 Control sequences
- 4.7.1 Sequence overview (setting via P001)
- 4.7.2 Application mode
- 4.7.3 2-pipe fan coil unit
- 4.7.4 2-pipe fan coil unit with electric heater
- 4.7.5 2-pipe fan coil unit with radiator or floor heating
- 4.7.6 2-stage heating and cooling
- 4.7.7 4-pipe fan coil unit
- 4.7.8 4-pipe fan coil unit with electric heater
- 4.7.9 Chilled/heated ceiling and radiator applications
- 4.7.10 Compressor applications
- 4.7.11 Applications with external AQR sensor or QMX room operator unit
- 4.7.12 Setpoints and sequences
- 4.8 Control outputs
- 4.9 Fan control
- 4.10 Multifunctional input, digital input
- 4.11 Handling system faults
- 4.12 KNX communications
- 4.12.1 S-Mode
- 4.12.2 Master/slave configuration in KNX S-Mode
- 4.12.3 LTE-Mode
- 4.12.4 Zone addressing in LTE-Mode (with Synco)
- 4.12.5 Master/slave configuration in LTE-Mode
- 4.12.6 Example of heating and cooling demand zones
- 4.12.7 Send heartbeat and receive timeout
- 4.12.8 Startup
- 4.12.9 Heating and cooling demand
- 4.12.10 Fault and alarms function on KNX
- 4.13 Communication objects
- 4.14 Communication objects (LTE-Mode)
- 4.15 Control parameters
- 5 Supported KNX tools
- 6 Connection
- 7 Technical data
- 8 Dimensions
- Index
About this document
Before you start
1
6 | 170
A6V11545892_en--_b
Subject
Ref.
Document title
Document
number
Synco and KNX (see
www.siemens.com/synco)
[6]
KNX bus, data sheet
CE1N3127
[7]
Communication via the KNX bus for Synco 700,
900 and RXB/RXL, Basic documentation
CE1P3127
[8]
Planning and commissioning protocol,
communication Synco 700
XLS template in
HIT
[9]
RMB795B central control unit, data sheet
CE1N3122
[10]
RMB795B central control unit, Basic
documentation
CE1P3122
[11]
KNX S-Mode data points
CE1Y3110
[12]
Product data for ETS
[13]
ETS product data compatibility list
CE1J3110
[14]
Synco Application manual
0-92168en
Desigo engineering
documents
[15]
Desigo RXB integration – S-Mode
CM1Y9775
[16]
Desigo RXB/RXL integration – Individual
addressing
CM1Y9776
[17]
Third-party integration
CM1Y9777
[18]
Synco integration
CM1Y9778
[19]
Working with ETS
CM1Y9779
Web server OZW772
[20]
Commissioning instructions
CE1C5701
1.3 Before you start
1.3.1 Trademarks
The table below lists the third-party trademarks used in this document and their
legal owners. The use of trademarks is subject to international and domestic
provisions of the law.
Trademarks
Legal owner
Synco
TM
Android
TM
Google Inc.
All product names listed in the table are registered (®) or not registered (™)
trademarks of the owner listed in the table. We forgo the labeling (e.g. using the
symbols ® and ™) of trademarks for the purposes of legibility based on the
reference in this section.
1.3.2 Copyright
This document may be duplicated and distributed only with the express permission
of Siemens, and may be passed only to authorized persons or companies with the
required technical knowledge.