Basic Documentation

Functions
Additional functions
4
A6V11545892_en--_b
45 | 170
4.6 Additional functions
Functions (parameters)
Description
RDG260KN
RDG200KN
Sensors and changeover functions [➙ 46]
● Heating/cooling changeover via bus (KNX)
Central control of heating / cooling via bus
✓
✓
● Automatic heating/cooling changeover via
changeover sensor
● Changeover switch (P150, P153, P155)
Auto changeover on each equipment
✓
✓
✓
✓
● Manual heating/cooling changeover (P001)
Heating / cooling controlled manually by user (via
HMI)
✓
✓
● External/return air temperature sensor (P150,
P153, P155)
Temperature measurement with external sensors
✓
✓
Presence detector [➙ 47]
● Standard presence mode (P150 / P153 / P155)
Switch operating mode locally or via bus
✓
✓
● Hotel presence mode (P150 / P153 / P155)
Switch operating mode locally or via bus
✓
✓
Output functions [➙ 48]
● Purge function (P251)
To ensure correct acquisition of the water
temperature
✓
✓
● Minimum output On/Off time (P212, P213)
To protect the HVAC equipment, for example, the
compressor and reduce wear and tear
✓
✓
● Swap outputs for 2-pipe and 2-stage
applications (P254)
To optimize the use of heating/cooling energy in
mixed systems
✓
✓
● Floor heating/cooling (P350)
Application without fan control
✓
✓
● Qx relay switching function (P400, P401, P402)
Control external equipment based on function status
(Heating/cooling demand, operating mode,
sequence, humidity, …)
✓
✓
Monitoring and limiting functions [➙ 51]
● Floor temperature limitation function (P252)
For user Comfort and protect the floor
✓
✓
● Supply air temperature limitation (P063, P064)
To increase the comfort, by avoiding to warm or too
cold air in the room
✓
✓
● Flow limitation in heating for PICV (P256)
To balance heating and cooling systems and avoid
hydraulic problems caused by different flow rates
✓
✓
● Dewpoint monitoring
● Fault state "condensation" (P150, P153, P155
= 4)
To prevent condensation damages in the building
✓
✓
✓
✓
● Valve kick/exercising (P250)
To prevent valve freezing after extended inactivity
✓
✓
● Return flow temperature control (P061, P062)
To save energy by adjusting flow speed in district
heating systems
✓
✓
User operation / Indication [➙ 54]
● Button lock (P028)
To limit access to unauthorized people
✓
✓
● Green leaf (P110, P111)
Indication about energy efficient
✓
✓
● Set time /date
To set the time of day (AM/PM, hours and minutes)
and date (weekday, month and year)
✓
✓
● Set Away (holiday mode)
To set a holiday period
✓
✓
Humidity [➙ 57]
● Humidity control (P007, P450)
Limit min. and max. humidity in the room
✓
✓
Scheduler [➙ 60]
● Scheduler (P005)
To set time schedule
✓
✓
Master/slave [➙ 62]
To save energy in open spaces
✓
✓
Preventive operation [➙ 66]
● Avoid cold air in heating mode (P365)
To make sure reaching setpoint temperature during
heating mode
✓
✓
● Avoid damage from moisture (P363, P364)
To prevent from damage of moisture
✓
✓
NFC communication [➙ 66]
● NFC (P500)
NFC communication via Siemens smartphone
application
✓
✓