User Manual

Supported KNX tools
ACS tool
5
A6V11545892_en--_a 119 | 146
Some parameters have a different range in ACS than on the room thermostats.
The thermostat does not accept changes that are outside its range. This can be
observed online by the fact that a changed value jumps back to the original value.
Use the ranges described in the parameter tables in Control parameters [➙ 104].
5.2.2 Operation and monitoring with ACS
In the ACS program, select Plant ➙ Open to open the plant.
To start monitoring and operation, select Applications ➙ Plant operation.
Note!
ACS