User Manual

Supported K
NX tools
ACS tool
5
A6V11545892_en--_a 117 | 146
1
Click Room relative humidity in the left pane and the humidity parameters
will display.
2
Adjust the parameters as required. See Control parameters [➙ 104] for
more details of control parameters.
3
Select as group object in checkbox of Humidity setpoints, and then the S-
Mode humidity setpoint displays in the Group Objects tab as follows:
4
Select Receive in checkbox of Room relative humidity. The thermostat then
receives the room’s relative humidity from an external sensor.
5.2 ACS tool
The ACS tool commissions the RDG2..KN KNX room thermostats (physical
address, application, parameters). They can be operated or monitored via bus
during normal operation.
This section does not describe how the physical address is defined and only
provides a brief overview of ACS’ main functionality.
For more information, refer to the ACS online help.
Setting RDG2..KN KNX parameters is only supported by ACS version 5.11 or
higher.
Humidity parameters
ACS
Note!