User Manual
Table Of Contents
- 1 About this document
- 2 Overview
- 3 Notes
- 4 Functions
- 4.1 Temperature control
- 4.2 Operating modes
- 4.3 Room temperature setpoints
- 4.4 Application overview
- 4.5 Power supply selection for RDG200KN
- 4.6 Additional functions
- 4.7 Control sequences
- 4.7.1 Sequence overview (setting via P001)
- 4.7.2 Application mode
- 4.7.3 2-pipe fan coil unit
- 4.7.4 2-pipe fan coil unit with electric heater
- 4.7.5 2-pipe fan coil unit with radiator or floor heating
- 4.7.6 2-pipe/2-stage heating or cooling
- 4.7.7 4-pipe fan coil unit
- 4.7.8 4-pipe fan coil unit with electric heater
- 4.7.9 Chilled/heated ceiling and radiator applications
- 4.7.10 Compressor applications
- 4.7.11 Applications with external AQR sensor or QMX room operator unit
- 4.7.12 Setpoints and sequences
- 4.8 Control outputs
- 4.9 Fan control
- 4.10 Multifunctional input, digital input
- 4.11 Handling system faults
- 4.12 KNX communications
- 4.13 Communication objects (S-Mode)
- 4.14 Communication objects (LTE-Mode)
- 4.15 Control parameters
- 5 Supported KNX tools
- 6 Connection
- 7 Technical data
- 8 Dimensions
- Index /
Functions
Application overview
4
A6V11545892_en--_a 39 | 150
4.4.2 Applications for universal systems
Applications, DIP setting, control outputs
● Chilled/heated
ceiling
● Chilled/
heated ceiling
and electric
heater
● Chilled/heated
ceiling and
radiator/floor
heating
Using RDG200KN, RDG260KN
Using RDG200KN, RDG260KN
Using RDG200KN, RDG260KN
● 2-stage
chilled/heated
ceiling
● Chilled ceiling
and radiator
● Chilled and
heated ceiling
control with 6-
port ball valve
Using RDG200KN, RDG260KN
Using RDG200KN, RDG260KN
Using RDG260KN
● Chilled and heated ceiling control with PICV and 6-port ball
valve as changeover
YHC Heating/cooling valve actuator
YH Heating valve actuator
YC Cooling valve actuator
YE Electric heater
D3 Dewpoint sensor
M1 1-speed or 3-speed fan, DC 0…10 V
fan
B1 Return air temperature sensor or
external room temperature sensor (optional)
B2 Changeover sensor (optional)
Using RDG260KN
Product No. Control outputs
RDG200KN On/Off, PWM, 3-position
RDG260KN On/Off, DC 0…10 V