User Manual
Table Of Contents
- 1 About this document
- 2 Overview
- 3 Notes
- 4 Functions
- 4.1 Temperature control
- 4.2 Operating modes
- 4.3 Room temperature setpoints
- 4.4 Application overview
- 4.5 Power supply selection for RDG200KN
- 4.6 Additional functions
- 4.7 Control sequences
- 4.7.1 Sequence overview (setting via P001)
- 4.7.2 Application mode
- 4.7.3 2-pipe fan coil unit
- 4.7.4 2-pipe fan coil unit with electric heater
- 4.7.5 2-pipe fan coil unit with radiator or floor heating
- 4.7.6 2-pipe/2-stage heating or cooling
- 4.7.7 4-pipe fan coil unit
- 4.7.8 4-pipe fan coil unit with electric heater
- 4.7.9 Chilled/heated ceiling and radiator applications
- 4.7.10 Compressor applications
- 4.7.11 Applications with external AQR sensor or QMX room operator unit
- 4.7.12 Setpoints and sequences
- 4.8 Control outputs
- 4.9 Fan control
- 4.10 Multifunctional input, digital input
- 4.11 Handling system faults
- 4.12 KNX communications
- 4.13 Communication objects (S-Mode)
- 4.14 Communication objects (LTE-Mode)
- 4.15 Control parameters
- 5 Supported KNX tools
- 6 Connection
- 7 Technical data
- 8 Dimensions
- Index /
Functions
Operating modes
4
28 | 150 A6V11545892_en--_a
Function if no time schedule is received via bus
User profile for
operating mode
(selected via P002)
Operating
mode
when
activating
function
Mode
button
Function
Operating
mode during
function
Operating
mode at the
end of
function
P002 = 1:
Comfort Extension Comfort Protection
Comfort Absence Protection Comfort
P002 = 2:
Comfort
or
Economy
Extension Comfort Economy
Comfort
or
Economy
Absence Economy Comfort
P002 = 3:
Comfort Extension Comfort
Protection
hospitality
Comfort Absence
Protection
hospitality
Comfort
Extension/absence is not available in Protection mode.
Function with time schedule via bus
User profile for
operating mode
(selected via P002)
Operating
mode when
activating
function
Mode
button
Function
Operating
mode
during
function
Operating
mode at
the end of
function
P002 = 1:
Auto Extension Comfort Auto
Comfort Extension Comfort Auto
Auto Absence Protection Auto
Comfort Absence Protection Auto
P002 = 2:
Auto,
Comfort or
Economy
Extension Comfort Auto
Auto,
Comfort or
Economy
Absence Economy Auto
P002 = 3:
Auto Extension Comfort Auto
Comfort Extension Comfort Auto
Auto Absence
Protection
hospitality
Auto
Comfort Absence
Protection
hospitality
Auto
Extension/absence is not available in Protection mode.
Note
Note