User Manual
Table Of Contents
- 1 About this document
- 2 Overview
- 3 Notes
- 4 Functions
- 4.1 Temperature control
- 4.2 Operating modes
- 4.3 Room temperature setpoints
- 4.4 Application overview
- 4.5 Power supply selection for RDG200KN
- 4.6 Additional functions
- 4.7 Control sequences
- 4.7.1 Sequence overview (setting via P001)
- 4.7.2 Application mode
- 4.7.3 2-pipe fan coil unit
- 4.7.4 2-pipe fan coil unit with electric heater
- 4.7.5 2-pipe fan coil unit with radiator or floor heating
- 4.7.6 2-pipe/2-stage heating or cooling
- 4.7.7 4-pipe fan coil unit
- 4.7.8 4-pipe fan coil unit with electric heater
- 4.7.9 Chilled/heated ceiling and radiator applications
- 4.7.10 Compressor applications
- 4.7.11 Applications with external AQR sensor or QMX room operator unit
- 4.7.12 Setpoints and sequences
- 4.8 Control outputs
- 4.9 Fan control
- 4.10 Multifunctional input, digital input
- 4.11 Handling system faults
- 4.12 KNX communications
- 4.13 Communication objects (S-Mode)
- 4.14 Communication objects (LTE-Mode)
- 4.15 Control parameters
- 5 Supported KNX tools
- 6 Connection
- 7 Technical data
- 8 Dimensions
- Index /
Technical data
7
A6V11545892_en--_a 143 | 150
Operational data
Humidity calibration range ±10 %
Settings and display resolution
Setpoint 0.5 °C
Present temperature value displayed 0.5 °C
Environmental conditions
Storage IEC 60721-3-1
Climatic conditions Class 1K3
Temperature -25…65 °C
Humidity < 95 % r.h.
Transport IEC 60721-3-2
Climatic conditions Class 2K3
Temperature -25…65 °C
Humidity < 95 % r.h.
Mechanical conditions Class 2M2
Operation IEC 60721-3-3
Climatic conditions Class 3K5
Temperature 0…50 °C
Humidity < 95 % r.h.
Standards and directives
EU conformity (CE) A5W00120120A
*
Electronic control type 2.B (micro-disconnection on operation)
RCM conformity A5W00120121A
*
Safety class II as per EN 60730
Pollution class Normal
Degree of protection of housing IP30 as per EN 60529