Technical data

75 / 86
Siemens RDG100KN Basic documentation CE1P3191en
Building Technologies Supported KNX tools 22 Jun 2010
5.2.2 Operation and monitoring with ACS
In the ACS Operating program, select Plant, then Open to open the plant.
To start monitoring and operation, select Applications, then Popcard
ACS Operating supports parameter settings even during normal operation.
To change a control parameter, select Popcard, then Settings.
 Make sure you have logged on with sufficient access right
 Only control parameter can be changed, no application!
ACS Operating
Parameter settings in
ACS Operating
Notes: