Technical data

58 / 86
Siemens RDG100KN Basic documentation CE1P3191en
Building Technologies Functions 22 Jun 2010
3.12 Communication objects (S-mode)
3.12.1 Overview
Page Object # and name Thermostat Object # and name Page
12 1 System time
12 3 Time of day
12 44 Outside temperature 21 Room temperature 12
16 Room operating mode:
State 1)
13
14 12 Room operating mode:
Time switch 1)
24 Room temperature:
Current setpoint
22
14 7 Room operating mode:
Preselection 1)
13, 15,
50
20
Room operating mode:
Window state
33 Fan operation
(0 = Auto / 1 = Manual)
47
35 Fan output 47
21 22 Room temperature:
Comfort basic setpoint
36 Fan stage 1 47
21 23 Room temperature:
Comfort setpoint
37 Fan stage 2 47
38 Fan stage 3 47
29 31 Application mode
25 Heating output primary 2) 56
47 32 Enable fan command value 26 Heating output secondary
2)
56
47 34 Fan command value 27 Cooling output primary 2) 56
28 Cooling output secondary 2) 56
32, 50 29 Enable electric heater
43 D1 51
25, 50 30 Heating/cooling changeover 39/40 X1 (temperature / digital) 51
41/42 X2 (temperature / digital) 51
57 6 Fault transmission 5 Fault state 27, 57
4 Fault information 27, 49,
51, 57
Input communication object
Output communication object
Input & output communication object
1) 8-bit and 1-bit object available, selectable via parameter in ETS3
2) Availability depending on selected application / function